HP XP Continuous Access Software User Manual

Page 225

Advertising
background image

Table 45 Error Codes and Error Contents When Operating RAID Manager

Error Contents

Error Code

(SSB2)

Error Code

(SSB1)

An error occurred in the XP Continuous Access Journal pair operation.

B901

B9E0

B9E1

B9E2

B9E4

D004

B901

B9E0

B9E1

B9E2

B9E4

D004

A request of XP Continuous Access Journal Pairresync (suspend transition
mode) was received. However, the command was rejected because the
PIN data existed in the journal volume.

3703

A request of XP Continuous Access Journal Paircreate was received.
However, the command was rejected because the emulation types of the
specified master journal group and of the restore journal group were
different.

3704

A request of XP Continuous Access Journal Paircreate (journal suspend
mode) or XP Continuous Access Journal Pairresync (journal resync mode)
was received. However, the command was rejected because the version
of the secondary storage system did not support the corresponding
command.

3705

A request of XP Continuous Access Journal Paircreate (journal suspend
mode) was received. However, the command was rejected because the
specified P-VOL was used as the S-VOL of XP Continuous Access
Synchronous, and the pair status was not PAIR.

3706

A request of XP Continuous Access Journal Pairresync (journal resync
mode) was received. However, the command was rejected because of
one of the following reasons:

The specified P-VOL was the P-VOL of XP Continuous Access
Synchronous, and the XP Continuous Access Journal pair status was
not PAIR.

The specified P-VOL was the S-VOL of XP Continuous Access
Synchronous, and the XP Continuous Access Journal pair status was
not SSWS.

3707

The XP Continuous Access Journal pair cannot be created because the
specified P-VOL was being shredded.

3708

A request of XP Continuous Access Journal Paircreate (journal suspend
mode) or XP Continuous Access Journal Pairresync (journal resync mode)
was received. However, the command was rejected because the specifying
of the restore journal group was incorrect.

3709

The XP Continuous Access Journal pair cannot be resynchronized
(DELTAJNL parameter specifying) because the specified P-VOL is not in
HOLD or HOLDTRNS status. Or, the XP Continuous Access Journal pair
cannot be resynchronized (ALLJNL parameter specifying) because the
specified P-VOL is not in HOLD, HOLDTRANS, or NODELTA status.

370B

A request of XP Continuous Access Journal Paircreate (journal suspend
mode) or XP Continuous Access Journal Pairresync (journal resync mode)
was received. However, the command was rejected because the status
of the specified master journal group or restore journal group could not
be transferred, or the status transition was in progress.

370C

371C

Troubleshooting When Using RAID Manager 225

Advertising
This manual is related to the following products: