HP XP Continuous Access Software User Manual
Page 226
Table 45 Error Codes and Error Contents When Operating RAID Manager (continued)
Error Contents
Error Code
(SSB2)
Error Code
(SSB1)
A request for XP Continuous Access Journal Paircreate or XP Continuous
Access Pairresync was received. However, the command was rejected
because the XP Continuous Access pair was in a status other than
suspending or was not used by XP Continuous Access in the 2DC
configuration which consists of XP Continuous Access Journal and XP
Continuous Access.
3DC multi-target configuration cannot be created because the system
option mode 707 was set to ON.
371D
A request of XP Continuous Access Journal Paircreate or Pairresync was
received. However, the command was rejected because the journal volume
of the specified master journal group was blocked.
3720
The pair cannot be created because the version of the DKCMAIN micro
program on the remote storage system does not support the LUSE volume.
3723
The XP Continuous Access Journal pair cannot be created because the
volume specified as the P-VOL was the system disk.
3726
A request of XP Continuous Access Journal Paircreate was received.
However, the command was rejected because it was connected with the
old model and the specified volume was unsupported.
3728
A request of XP Continuous Access Journal Paircreate was received.
However, the pair could not share the volume with XP Continuous Access
because the Disaster Recovery Extended program product was not installed
in the primary storage system.
3729
A pair cannot be created because the secondary storage system does not
support the combination of multiple primary and secondary storage
systems.
372B
The volume is inaccessible because the primary volume is blocked.
372C
The specified volume is used in the system that consists of multiple primary
and secondary storage systems. Therefore the command was rejected
because the delta resync operation cannot be executed.
372D
A request to create or resynchronize a pair in the system that consists of
multiple primary and secondary storage systems was received. However,
the command was rejected because the Disaster Recovery Extended
program product was not installed in the primary storage system.
372E
In the configuration where three XP Continuous Access Journal sites are
combined, because the pair status of another mirror is not fixed, the XP
Continuous Access Journal pair cannot be created.
3737
A request of XP Continuous Access Journal Paircreate was received.
However, the command was rejected because Disaster Recovery Extended
was not installed in the primary storage system.
3738
A request of paircreate of the second mirror was received for one primary
volume. However, because the journal group to which the primary volume
belongs did not allow the configuration combining three XP Continuous
Access Journal sites, the command was rejected.
3739
A request of pair creation using journal group in the configuration where
three XP Continuous Access Journal sites were combined was received.
However, since the secondary volume was used by other program, the
command was rejected.
373D
In the cascading configuration combining three XP Continuous Access
Journal sites, the status of the pair between the intermediate site and the
secondary site is not fixed. Therefore the XP Continuous Access Journal
pair between the primary site and the intermediate site cannot be created.
373E
226 Troubleshooting