HP XP Continuous Access Software User Manual
Page 231
Table 45 Error Codes and Error Contents When Operating RAID Manager (continued)
Error Contents
Error Code
(SSB2)
Error Code
(SSB1)
XP Continuous Access Journal Paircreate cannot be performed because
the mirror ID is invalid.
B902
/B901/
/B9E0/
/B9E1/
/B9E2/
/D004/
/B9E4/
The command was rejected because the volume status was SMPL.
B907
The S-VOL hide mode is not supported.
B90A
XP Continuous Access Journal Paircreate cannot be performed because
the XP Continuous Access Journal program product is not installed.
B90D
XP Continuous Access Journal pair cannot be suspended because the
mirror ID is invalid.
B909
A status of unavailable occurred because the XP Continuous Access Journal
pair was acquired during the power-on. Retry the operation.
B900
The command was rejected because the XP Continuous Access Journal
configuration was changed. Check the status of the XP Continuous Access
Journal pair.
B94B
A request of XP Continuous Access Journal Paircreate was received.
However, the command was rejected because the consistency group
number is wrong.
B90B
A request of XP Continuous Access Journal Paircreate was received.
However, the command was rejected because the path is not set between
the storage systems.
B90E
A request of XP Continuous Access Journal Paircreate on the XP Continuous
Access Journal intermediate volume was received. However, the command
was rejected because either Hitachi Universal Replicator for Mainframe
or Hitachi TrueCopy for Mainframe was not installed.
B90F
The settings of the journal group option could not be updated.
B910
A request of XP Continuous Access Journal Paircreate or Pairresync was
received. However, the command was rejected because the system
configuration does not allow these operations.
B913
The command was rejected because no journal group was registered.
B912/B9F8
A request of XP Continuous Access Journal pair status transition was
received. However, the command was rejected because the status for the
request could not be transited. (for example, Status transition other than
SMPL when the Paircreate was requested, or other than PSUS when the
Pairresync was requested.)
DB02
A request of XP Continuous Access Journal Pair status transition was
received. However, the command was rejected because the pair was in
the state of Suspending or Deleting.
DB03
XP Continuous Access Journal pair status cannot be transited during the
power-on processing.
DB07
XP Continuous Access Journal pair status cannot be transited during the
power-off processing.
DB08
A request of XP Continuous Access Journal Paircreate was received.
However, the command was rejected because the specified volume was
used in a pair on the XP Continuous Access Asynchronous.
DB09
A request of XP Continuous Access Journal Pairresync (journal resync
mode) was received. However, the command was rejected because the
specification was volume instead of group.
DB0C
E843
Troubleshooting When Using RAID Manager
231