HP XP Continuous Access Software - Manual (Page 239)

Table 45 Error Codes and Error Contents When Operating RAID Manager (continued)
Error Contents Error Code
(SSB2)
Error Code
(SSB1)
A request of XP Continuous Access Journal Paircreate was received.
However, the command was rejected because the path between the
primary and the secondary storage systems was not valid.
A request of XP Continuous Access Journal Paircreate was received.
However, the command was rejected because the specified P-VOL was
a command device. EB62
A request of XP Continuous Access Journal Paircreate was received.
However, the command was rejected because the restore journal group
was already linked with another journal group. EB63
A request of XP Continuous Access Journal Paircreate was received.
However, the command was rejected because the desired capacity
exceeded the charging capacity of the program product. EB64
A request of XP Continuous Access Journal Paircreate was received.
However, the command was rejected because of the abnormal end that
is related to the charging capacity of the program product. EB65
The command was rejected and the retry processing was ordered because
P-VOL SUSPENDING was detected by executing the RAID Manager
horctakeover (resync) command.
EB66
The XP Continuous Access Journal pair create processing was doubly
executed:
•
There are no problems if the initial copy operation was restarted when
the primary storage system is powered off.
• There are no problems if an XP Continuous Access Journal pair is
created when the primary storage system is reset.
EB6C
A request of XP Continuous Access Journal Paircreate was received.
However, the command was rejected because the XP Continuous Access
Journal program product was not installed in the primary storage system. EB6E
The XP Continuous Access Journal pair cannot be created because the
specified S-VOL is assigned to the copy pair of other program products. EB70
The XP Continuous Access Journal pair cannot be created because the
specified S-VOL is the system disk. EB73
A request of XP Continuous Access Journal Paircreate was received.
However, the command was rejected because the journal cache of the
restore journal group remained. EB7A
The XP Continuous Access Journal pair cannot be created because the
specified S-VOL is an external volume. EB7D
The XP Continuous Access Journal pair cannot be created because the
specified S-VOL is in the either one of following two statuses:
•
The specified S-VOL is being used for the XP Business Copy pair.
• The specified S-VOL is the reserved volume.
EB7E
A request of Paircreate was received. However, the command was rejected
because the emulation type of the specified S-VOL was unsupported. EB7F
The command was rejected because the specified volume was the V-VOL
or the pool-VOL. Check the status of the volume. EB80
A request of XP Continuous Access Journal Paircreate was received.
However, the command was rejected because the path from the secondary
storage system to the primary storage system was not set, or the S-VOL
was in the SMPL status. EB87
Troubleshooting When Using RAID Manager 239