HP XP Continuous Access Software - Manual (Page 153)

3. Do one of the following:
•
Click LDKC from the tree. In the upper-right list, select and right-click a remote storage
system.
•
Click the remote storage system from the tree. In the upper-right list, select and right-click
a logical path.
4. Select DKC Status. The DKC Status window opens ( Figure 71 (page 153) ).
•
If a remote storage system is selected in the list, the DKC status window shows all the
logical paths between the local and the remote storage systems, and shows the status for
each of the paths.
•
If a logical path is selected in the list, the DKC status window shows only the status of the
selected logical path.
5. Check the status of the logical path(s), and then click Close to close the DKC status window.
Figure 71 DKC Status Window
The DKC Status window shows the following:
•
List:
No.: Serial numbers used for rows in the list ◦
◦ Path Status: Status of a logical path (for details, see Table 34 (page 154) )
◦ Port: A port on the local storage system
◦ Pair-Port: A port on the remote storage system.
•
S/N: The serial number and LDKC number of the remote storage system.
•
Controller ID: The controller ID and the model name of the remote storage system.
•
Path Gr. ID: A path group ID.
Viewing the Status of Logical Paths 153