HP StorageWorks XP Remote Web Console Software - Manual (Page 114)

(4) This column is not used.
(5) LDKC number, CU number, and LDEV number of the paired volume.
(6) The time taken for the operation (from the start of the operation to the end).
Displayed only for Pairing Complete and Pair Resync. Complete operations.
Example of an XP Continuous Access History File
2002/07/25 20:26:43,Pairing Start,00:1a:80,-----,00:1a:85,
2002/07/25 20:25:30,Pair Delete,00:00:84,-----,00:00:86,
2002/07/25 17:01:33,Suspend Operation,00:00:85,-----,00:00:87,
2002/07/19 20:01:58,Pair Resync. Complete,00:1a:80,-----,00:1a:9e,000:00:02
2002/07/19 20:01:56,Pair Resync. Start,00:1a:8a,-----,00:1a:a8,
2002/07/18 09:36:22,Pairing Complete,00:1a:80,-----,00:1a:85,000:00:10
(1) (2) (3) (4) (5) (6)
Other Operations
The System Option window allows you to change the option settings of the storage system.
Changing the Option Settings of Storage System
The information for the storage system's option settings information is displayed if you select
Subsystem Option from the tree on the System Option window.
Figure 43 Option Settings List for the Storage System
•
Activities: Number of volumes in concurrent initial copy operations (1 to 512).
•
Activities (CU): Shows whether the CU-by-CU setting of concurrent initial copy operations will
be enabled or disabled.
•
Path Watch: Time for monitoring a blockade in the paths (2 to 45 seconds).
•
Path SIM Watch: Time for monitoring SIMs that are reported when paths are blocked (2 to
100 seconds).
To change the storage system option settings:
1. Click the System Option tab, and then select Subsystem Option in the tree (see “System Option
Window” (page 83) ).
2. Right-click the list to display the menu, and select System Option to open the System Option
dialog box (see
“System Option Dialog Box” (page 115) ).
3. On the System Option dialog box, change the storage system options.
When the System Option dialog box opens, the current settings are displayed.
4. Click the Set button to close the System Option dialog box. The desired changes are displayed
in the preview list. To cancel the change(s), click the Cancel button.
114 Performing XP Continuous Access Configuration Operations