HP StorageWorks XP Remote Web Console Software - Manual (Page 9)

LUN Configuration and Security Manager XP user guide for the XP128/XP1024 9
About this guide
This guide provides information about:
• ” LUN Manager for the XP128/XP1024 ” on page 13
• ” LU configuration overview ” on page 13”
• ” Supported emulation types ” on page 13
• ” LU paths ” on page 13
• ” Configuring LU paths in a Fibre Channel environment ” on page 14
• ” Configuring LU paths in a NAS environment ” on page 15
• ” 16-Port FC/CA CHIP product ” on page 16
• ” Host groups ” on page 17
• ” Host modes ” on page 18
• ” LUN Security ” on page 19
• ” RAID Manager command devices ” on page 20
• ” Fibre Channel port attributes ” on page 21
• ” iSCSI environments ” on page 23
• ” LUN Manager operations ” on page 28
• ” Port Operations ” on page 45
• ” Making settings on iSCSI ports and iSNS servers ” on page 48
• ” Checking the status of connection between hosts and the disk array (iSCSI environment only) ” on
page 49
• ” Setting user authentication (iSCSI environments only) ” on page 49
• ” Operational restrictions ” on page 55
• ” Volume Management for the XP128/XP1024 ” on page 59
• ” Volume Management (LU Size Expansion) ” on page 59
• ” Volume Size Configuration (VSC) ” on page 60
• ” LUSE operations ” on page 66
• ” VSC Operations ” on page 71
• ” Operational restrictions ” on page 90
Intended audience
This guide is intended for customers and HP-authorized service providers with knowledge of the following:
• Disk array hardware and software
• Data processing and RAID storage subsystems and their basic functions
Prerequisites
Prerequisites for using this product include:
• Installation of the HP StorageWorks disk array(s)
• Installation of the license key for this product
Firmware versions
The recommended firmware versions, shown below, provide the optimal level of support for the features
provided with this product. Older firmware versions can be used; however, product features enabled with
newer firmware will not appear.