HP XP20000XP24000 Disk Array - Manual (Page 23)

download the JRE install program, and then copy the install program to install JRE on the
Remote Web Console computer. For the procedure to install JRE, follow the instructions in the
JRE install guide.
•
For Windows systems, if JRE is installed successfully, Java is displayed in the Control
Panel. Confirm that you can activate JRE using the Java icon.
•
For UNIX systems, confirm that you can open the ControlPanel.html file in the
directory where JRE is installed.
If JRE is not installed on a Remote Web Console computer running Windows, JRE is
automatically installed via the Internet when you log in to Remote Web Console.
5. Add the URL of the Tool Panel (see “Tool Panel” (page 91) ) to the favorites or bookmarks of
your web browser.
Configuring Remote Web Console over a Firewall
To connect Remote Web Console and SVP over a firewall, configure a firewall to use the following
TCP/IP ports. If the operating system of your Remote Web Console computer is Windows Vista,
this must be done because Windows Vista uses a firewall by default.
Table 10 Firewall Configuration
Direction of Communications Port Number Protocol
From the Remote Web Console
computer to SVP 80 HTTP
1099 RMI
51099 RMI
51100 RMI
161 SNMP
1
From SVP to the Remote Web Console
computer 162 SNMP Trap
1
1 Required if you use the Remote Web Console as an SNMP manager.
Configuring Java
You need to configure Java to enable trace and logging to save the Java log file when an application
error occurs in the Remote Web Console computer. Also, to prevent unexpected contradictions
when the microcode is updated, HP recommends that you disable caching.
CAUTION: To allow Remote Web Console to access the SVP via a proxy server using HTTP, set
the proxy server on your web browser, and then Remote Web Console accesses the SVP using
the proxy server.
If you have set the SVP as an exception on the proxy setting of the web browser, it means that the
proxy server is not used for accessing the SVP. In this case, make the setting for Java the same as
the web browser setting.
This section describes the procedures to configure Java for each JRE version.
JRE 1.4
For JRE 1.4, you do not need to enable trace and logging because trace and logging are enabled
by default.
To disable caching and configure proxy setting for the Java execution:
Setting Up Remote Web Console 23