Deleting pairs – HP StorageWorks XP Remote Web Console Software User Manual

Page 85

Advertising
background image

7.

Click OK to reflect the settings displayed in the Pairresync dialog box to the Preview List on
the Pair Operation window.

If you try to perform the quick restore operation to the pair you select from the Pairresync
Volume List that is composed of volumes stored in multiple cache logical partitions (CLPRs), a
message asking you whether you want to click OK and continue the operation will appear.
Click OK if you do, or click Cancel to discontinue the quick restore operation.

8.

Repeat steps

6

through

7

until the Preview List on the Pair Operation window displays the

desired pairs (settings).

9.

Make sure to verify that the S-VOLs are offline before starting the pairresync operations.

10.

On the Pair Operation window, click Apply to resynchronize the specified pairs.

The Pair Operation window displays the results of the pairresync operations (that is, pair status
changed to COPY(RS), COPY(RS-R), or PAIR) and the progress (%) of the update copy operation.
The pair status will change to PAIR right away, if the update copy operation is not necessary.

CAUTION:

When reverse or quick restore resync operation ends abnormally, or Pairsplit-E (PSUE) is
requested during reverse or quick restore resync operation, the pair status changes to PSUE.
The P-VOL of the PSUE pair is read- and write-enabled for all hosts; however, the data on the
P-VOL is not guaranteed. The S-VOL of the PSUE pair remains write-disabled (read-only);
however, the data on the S-VOL is not guaranteed.

Even when reverse or quick restore resync operation ends abnormally, or Pairsplit-E (PSUE) is
requested during reverse or quick restore resync operation, the status of other XP Business
Copy pairs that share the same P-VOL does not change.

Deleting Pairs

The Pairsplit-S dialog box (see

Figure 36 (page 86)

) allows you to delete the pairs. The Pairsplit-S

is an operation to stop copying data into the S-VOL of an XP Business Copy pair, and set the status
of the P-VOL and S-VOL back to SMPL volumes.

Deleting Pairs

85

Advertising