HP StorageWorks XP Remote Web Console Software - Manual (Page 96)

Table 40 Error Code and Error Contents When Operating RAID Manager (continued)
Error Contents Error Code (SSB2) Error Code (SSB1)
Because the status of the XP Continuous Access Journal pair was not
PAIR, PSUS, or PSUE, the At-Time Split operation was rejected. The 201b
S-VOL of the XP Continuous Access Journal pair had been the P-VOL
of the XP Business Copy pair included in the consistency group on
which the At-Time Split operation was performed.
The quick restore operation was rejected because the cache mode of
the specified P-VOL was different from the cache mode of the external
S-VOL. 2026
Because the volume specified as a P-VOL was a quorum disk, the pair
operation was rejected. 2036
Because the volume specified as a S-VOL was a quorum disk, the pair
operation was rejected. 2037
The volume specified as a P-VOL was a volume of an XP Continuous
Access Journal pair. Because the status of the XP Continuous Access
Journal pair was invalid, the Pair operation was rejected. 2060
The volume specified as an S-VOL was a volume of an XP Continuous
Access Journal pair. Because the status of the XP Continuous Access
Journal pair was invalid, the Pair operation was rejected. 2061
2067 1. Volumes of the specified pair were shared by the XP Continuous
Access pair (Synchronous and Asynchronous) and the XP Continuous
Access Journal pair. Therefore, the quick restore operation was
rejected.
2. Volumes of the specified pair were shared by the XP Continuous
Access pair (Synchronous and Asynchronous) and the XP Continuous
Access Journal pair. The reverse copy operation was rejected
because the status of the XP Continuous Access pair (Synchronous
and Asynchronous) or the XP Continuous Access Journal pair was
not PSUS.
Because the specified P-VOL or S-VOL was being shredded, the pair
operation was rejected. 2068
Because the volume specified as the P-VOL met one of the following
conditions, the pair operation was rejected. 2072 b9a0/b9a1/b9a2/
b9a5/b9a6/b9ae/
1. The P-VOL was a pool volume for XP Snapshot.
b9af
2. The P-VOL was the S-VOL of an XP Snapshot pair or a V-VOL for
XP Snapshot.
3. The P-VOL was the P-VOL of an XP Snapshot pair and one of the
following conditions held true:
• While the XP Snapshot pair was restored, the create pair
operation, the Split operation, or the pairresync operation was
performed on the XP Business Copy pair.
• The XP Business Copy quick restore operation was performed.
• The consistency group was defined for XP Business Copy.
• The create pair operation, the Split operation, or the pairresync
operation was performed on the XP Business Copy pair after the
MU number used by an XP Snapshot pair was specified.
Because the volume specified as the S-VOL met one of the following
conditions, the pair operation was rejected. 2073
96 Troubleshooting