HP StorageWorks XP10000 Disk Array - Manual (Page 108)

• Secondary Server Output Folder: You can set the folder location to save the audit log information
file. The default is the root folder (/). The restriction for the available values is the same as
that of Primary Server Output Folder.
• Transfer to Secondary Server: When you select the Transfer button, the audit log information file
is transferred to the secondary FTP server according to the settings on the Audit Log panel. You
can transfer the current audit log information file without waiting for the audit log information
file to reach the threshold.
• Apply: The Apply button allows you to make all the settings made on the Audit Log panel
effective. This button is available only when you are in the modify mode.
• Cancel: The Cancel button allows you to cancel all the settings made on the Audit Log panel
in the modify mode.
Control Panel
You can open the Control Panel by clicking Option ( ) in the Remote Web Console main pane. Only
storage administrators can open the Control Panel.
You can perform the following operations using the Control Panel:
• Setting XP Remote Web Console environment parameters (see
“ Setting the XP Remote Web Console Environment Parameters ” on page 108)
• Downloading configuration files (see “ Downloading the Log and Configuration Files ” on page 112)
• Restoring backup files (see “ Restoring Backups of Configuration Files ” on page 116)
Setting the XP Remote Web Console Environment Parameters
(Set Env. pane)
IMPORTANT:
To set the environment parameters, you need to log on as a storage administrator with the Enable
authority of the Storage Administrator role. After you have set the environment parameters, you need to
log on to the XP Remote Web Console again to make the new parameters take effect.
CAUTION:
If you edit the XP Remote Web Console environment parameters to change the settings, you must back up
the XP Remote Web Console configuration file by downloading the file from the SVP. For instructions on
downloading the configuration file, see “ Downloading the Log and Configuration Files ” on page 112
If you log on as a storage administrator with the Enable authority of the Storage Administrator Role, the
Set Env. tab of the Control Panel (see Figure 70 ) allows you to set the following XP Remote Web Console
environment parameters:
• Automatic distribution of the Java™ plug-in
• RMI™ time-out period
• RMI™ time-out period for Modify mode
• Polling period for checking exclusive lock
• Polling period for checking status and events
• Status pane hidden option
To access the Set Env. tab, click Option ( ) on any of the XP Remote Web Console panes to open the
Control Panel. The Set Env. tab is the default view (see Figure 70 ) to open the Set Env. pane).
108 Performing XP Remote Web Console Operations