HP StorageWorks XP10000 Disk Array - Manual (Page 107)

Figure 69 The Audit Log Panel
The Audit Log panel has the following features:
• Output to Primary Server: You can specify whether to transfer the audit log information file to
the primary FTP server. If you want to transfer the audit log information file to the primary FTP
server, select Enable. If you do not want to transfer the audit log information file to the primary
FTP server, select Disable.
• Primary Server Setting: You can set IP Address for the primary FTP server. As you set Output to
Primary Server to Enable, IP Address becomes available. The default has been entered for IP
Address, so change it as you need. For IP Address, you need to enter four integers in the range
of 0 to 255 (e.g., nnn.nnn.nnn.nnn, where n is a numeric). You need to enter only numbers,
and not to enter the periods.
• Primary Server Login User: You can set User ID and Password to log into the primary FTP server.
You can enter up to 256 alphanumeric characters and symbols (ASCII codes) for user ID and
password.
• Primary Server Output Folder: You can set the folder location to save the audit log information
file. The default is the root folder (/). You can enter up to 256 alphanumeric characters and
symbols (ASCII codes) for the output folder.
• Transfer to Primary Server: When you select the Transfer button, the audit log information file
is transferred to the primary FTP server according to the settings on the Audit Log panel. You
can transfer the current audit log information file without waiting for the audit log information
file to reach the threshold.
• Output to Secondary Server: You can specify whether to transfer the audit log information file to
the secondary FTP server. If you want to transfer the audit log information file to the secondary
FTP server, select Enable. If you do not want to transfer the audit log information file to the
secondary FTP server, select Disable.
• Secondary Server Setting: You can set IP Address for the secondary FTP server. As you set Output
to Secondary Server to Enable, IP Address becomes available. The default has been entered
for IP Address, so change it as you need. The restriction for the available values is the same
as that of Primary Server Setting.
• Secondary Server Login User: You can set User ID and Password to log into the secondary FTP
server. The restriction for the available values is the same as that of Primary Server Login User.
HP StorageWorks 107