HP StorageWorks XP10000 Disk Array - Manual (Page 67)

• Displays capacity that is already being used. For example, if this column displays 10.0 TB
(2.50 TB), the licensed capacity is 10.0 TB and the capacity already being used is 2.50 TB.
NOTE:
If the size is unlimited, Unlimited is displayed.
NOTE:
Licensed capacities are calculated assuming that 1 kB = 1,024 bytes, 1 MB = 1,024 kB, 1 GB = 1,024
MB, and 1 TB = 1,024 GB.
• Term (days) column that shows the number of days that remain before the expiration of a
temporary or emergency key.
• Status column that shows the current status of an option:
• Installed: The option is available. The Product Name column displays the Installed icon (
• Not Installed: The option is not available. The Product Name column displays the Not
Installed icon (
• Not Enough: The volume capacity is insufficient. The Product Name column displays the Not
Installed icon (
• Capacity Insufficient: The licensed capacity is insufficient because disk drives are added. The
Product Name column displays the Not Installed icon ( ). Be sure to purchase enough
capacity before the license key expires.
• Expired: The license key of the option that has been in the Capacity Insufficient status has
expired. The Product Name column displays the Not Installed icon ( ).
• Time Out: The term has already expired for the temporary key. The Product Name column
displays the Not Installed icon (
The bottom section of the License Key Partition Definition pane displays the following information:
• Total Capacity: The total licensed capacity for the selected product option. Unlimited indicates
that the licensed capacity is unlimited.
• Remaining Capacity: The remaining licensed capacity (in GB) that is not yet allocated to any
SLPR among the whole licensed capacity for the product option that is selected in the list. When
the licensed capacity for the product that is selected in the list is unlimited, Unlimited is displayed.
When you select a product, the Partition Status List is displayed under the information on the licensed
capacity (see Figure 41 ). This allows you to click and display information regarding a storage
logical partition.
).
).
)
).
Figure 41 Partition Status List
The Partition Status list displays the following information for the selected product option:
• SLPR Name: The storage logical partition name
HP StorageWorks 67