Create v-vol confirmation dialog box – HP StorageWorks XP Remote Web Console Software User Manual
Page 48
Description
Item
•
Input SSID: Sets SSID you select or input from the Input
SSID list.
•
Set SSID: Updates SSID you select or input from the
Input SSID list.
Set
If checked, you can enter SSID excluding SLPR that contains
a parity group of your operation in the Input SSID list. If
not checked, you can only select SSID of SLPR that contains
a parity group of your operation.
SSID number of another SLPR is used appears only when
you are logged in as a storage administrator and more
than two SLPRs exist. If not checked, Input SSID is not
available.
SSID number of another SLPR is used
Maintains the settings in this dialog box while returning
you to the Create V-VOL dialog box (1) (see
).
Back
Implements the settings in this dialog box and opens the
Create V-VOL Confirmation Dialog Box (see
Confirmation Dialog Box” (page 49)
).
Next
Cancels the operation and closes the dialog box.
Cancel
Create V-VOL Confirmation Dialog Box
Access the V-VOL Confirmation Dialog Box by selecting Next on the Create V-VOL Dialog Box (2)
(see
“Create V-VOL Dialog Box (2)” (page 45)
).
48
Using the XP Thin Provisioning GUI