HP StorageWorks XP Remote Web Console Software - Manual (Page 35)

Figure 12 V-VOL Window
Description Item
Provides the following information about V-VOLs of XP Thin Provisioning:
• used: Total capacity (GB) of V-VOLs associated with Pools.
•
remaining: Total capacity (GB) of V-VOLs that can be associated with pools. This
capacity is calculated based on the assumption that V-VOLs of 1024 GB are
associated with pools.
If V-VOLs of another size are associated with pools, calculate the total capacity
of V-VOLs that can be associated with pools from the remaining value by the
following formulas.
X1 = (remaining (GB) 1024)
S1 = (X1 x 14 + (remaining (GB) - (X1 x 1024) ) 84)
S2 = ( ( Capacity of one V-VOL (GB) 84) + 1)
Total capacity of V-VOLs that can be associated with pools = (S1 S2) x
Capacity of one V-VOL:
◦ indicates that the number enclosed by two downward arrows should be
rounded down to the nearest whole number.
◦ indicates that the number enclosed by two upward arrows should be
rounded up to the nearest whole number.
CAUTION: The values of used and remaining are not reflected in the window
until you click the Apply button.
Connect Pool Capacity
Shows the V-VOL groups in the storage system. The following icons can appear:
•
: The folder for a storage system or a program product
• : V-VOL group
◦ A V-VOL group icon followed by a V indicates an XP Snapshot V-VOL, which
cannot be used for XP Thin Provisioning operations.
◦ A V-VOL group icon followed by an X indicates an XP Thin Provisioning V-VOL
(XP Snapshot also uses V-VOL).
◦ : V-VOL group (in the process of being deleted)
◦ : VDEV
“V-VOL Window Pop-up Menu Commands” (page 37) lists the commands available
from the pop-up menu.
V-VOL Group - V-VOL tree
V-VOL Window 35