HP StorageWorks XP Remote Web Console Software - Manual (Page 64)

•
To select a CU that belongs to another SLPR, select the CU number of another SLPR is
used check box.
Only the areas displayed by the white cells are available for the V-VOLs. Once the area
is selected, it turns blue, and the CU and LDEV number are added to the V-VOL list on
the top of the dialog box, in blue bold italics.
•
To add another V-VOL, repeat this step.
8. Click Next.
9. In the Create V-VOL Group Confirmation dialog box (see “Confirming V-VOL Group Creation”
(page 65) ), verify that the settings are correct, and then click OK. The new V-VOLs appear in
blue bold italics.
10. Click Apply, and then click OK to create the V-VOLs.
Figure 33 Creating a New V-VOL Group (1)
Figure 34 Creating a New V-VOL Group (2)
64 Performing XP Thin Provisioning Operations