HP XP External Storage Software User Manual
HP Storage
Advertising
This manual is related to the following products:
Table of contents
Document Outline
- HP StorageWorks XP24000 External Storage Software User’s Guide
- About this Guide
- 1 Overview of HP StorageWorks XP External Storage Software
- 2 About External Storage Operations
- Connecting External Storage System
- External Storage Components
- External Storage Operations
- Configuring External Storage
- Choosing Mapping Policy
- Using a Mapped External Volume from a Connected Host
- Interoperability with other Products and Functions
- Examples of Using External Volumes with Other Products
- 3 Preparing for External Storage Operations
- 4 Using the External Storage GUI
- 5 Performing External Storage Operations
- Overview of Setting Operations
- Setting Port of External Storage System
- Setting Port Attribute for Local Storage System
- Mapping an External Volume Automatically
- Mapping an External Volume Manually
- Setting the Cross-subsystem Paths
- Checking the External Volume Details
- Turning On or Off the Storage System
- Disconnecting External Storage System or Disconneccting External Volume
- Checking Connection Status and Resuming External Volume Operation
- Stopping the Use of Paths to the External Volume (Disconnect Paths)
- Restoring the Paths to the External Volume (Check Paths)
- Changing the Cache Mode Setting of the External Volume
- Changing the Inflow Control Setting of the External Volume
- Changing the Port Setting of the External Storage System
- Editing Mapping Policy
- Deleting the External Volume Mapping
- 6 Remote Command Devices
- 7 Troubleshooting
- A Connecting External Storage Systems
- TagmaStore AMS Storage System, TagmaStore WMS Storage System
- Thunder 9500V Storage System
- USP V Storage System
- TagmaStore USP Storage System, TagmaStore NSC Storage System
- Lightning 9900V Storage System
- Lightning 9900 Storage System
- SVS200 Storage System
- EVA Storage System
- System Parameter Settings for Connecting Sun StorEdge 6120/6320
- System Parameter Settings for Connecting StorageTek FlexLine 380
- System Parameter Settings for Connecting CLARiiON CX600
- Non-HP Storage Systems
- B Required Volume Capacity for Each Emulation Type
- C Adjusting Volume Capacities for Pairs
- D Acronyms and Abbreviations
- Index