HP XP External Storage Software - Manual (Page 77)

Figure 37 Set SSID Dialog Box
SSID (0004–FFFE): Select the SSID from the SSID drop-down list. You can select the value for
an SSID from 0x0004 to 0xFFFE.
• If you have selected the SLPR Limited check box on the SSID dialog box, only the SSIDs that
can be used in SLPR selected on the SSID dialog box are displayed in the drop-down list.
• If you have not selected the SLPR Limited check box on the SSID dialog box, all of the unused
SSIDs are displayed in the drop-down list regardless of the selected SLPR.
Example: How to Map LDEVs Automatically
For instance, you map two external volumes which have the same emulation type, and create two
LDEVs in each external volume.
To assign the number which starts 00:01:01 with 255 intervals to total four LDEVs that you created:
1. Select the two external volumes and right-click them in the Add Volume dialog box, and then
click the LDEV Mapping (Auto) in the pop-up menu.
The LDEV Mapping (Auto) dialog box is displayed.
2. Configure the starting LDEV number and interval as follows:
• LDKC:
00
• CU: 01
• Interval: 255
• LDEV map: Select the cell in the row 1 and column 00.
3. Click OK.
LDEV numbers are automatically assigned as follows:
• the
first LDEV: 00:01:01
• the second LDEV: 00:02:01
• the third LDEV: 00:03:01
• the fourth LDEV: 00:04:01
However, the Add Volume dialog box displays only the LDEV number assigned for the first
LDEV of each external volume. In this case, 00:01:01... and 00:03:01... are displayed in the
Add Volume dialog box.
Example: How to Map LDEVs Manually
For instance, you map two external volumes which have the same emulation type, and create two
LDEVs in each external volume.
To assign the desired number to total four LDEVs that you created:
1. Select the two external volumes and right-click them in the Add Volume dialog box, and then
click the LDEV Mapping (Manual) in the pop-up menu.
The LDEV Mapping (Manual) dialog box is displayed.
2. Click the LDEV to which you want to assign an LDEV number in the LDKC:CU:LDEV column on the
left of the LDEV Mapping (Manual) dialog box.
3. Select the desired LDKC number and the desired CU number to the specified LDEV from the
drop-down list on the right of the LDEV Mapping (Manual) dialog box.
4. Click the cell of the desired LDEV number in the LDEV map on the right of the LDEV Mapping
(Manual) dialog box (see Figure 38 on page 78).
The selected cell turns blue and the assigned LDEV number is displayed in the LDKC:CU:LDEV
column.
XP24000 External Storage Software User’s Guide 77