HP XP External Storage Software - Manual (Page 114)

Table 21 System Parameter Settings (TagmaStore AMS Storage System and
TagmaStore WMS Storage System)
Window Names Parameters Parameter Settings
Boot Options Start Attribute
• Single Mode
Specify this parameter when TagmaStore AMS
storage system or TagmaStore WMS storage
system is in the one controller configuration.
• Dual Active Mode
Specify this parameter when TagmaStore AMS
storage system or TagmaStore WMS storage
system is in the two controller configuration.
Delay Planned Shutdown
You can either specify this parameter or omit
specifying this parameter.
Drive blocking mode
You can either specify this parameter or omit
specifying this parameter.
Vendor ID
Keep this parameter as HITACHI (default),
and do not change.
Product ID
Keep this parameter as DF600F (default), and
do not change.
ROM Microcode Version
You can either specify this parameter or omit
specifying this parameter.
RAM Microcode Version
You can either specify this parameter or omit
specifying this parameter.
System Parameter Option
You can either specify this parameter or omit
specifying this parameter.
Operation if the processor failure
occurs
Specify this parameter to Reset of occurred.
WEB Title
You can either specify this parameter or omit
specifying this parameter.
Write and verify mode Set this parameter to ON.
Port Options Port Option
You can either specify this parameter or omit
specifying this parameter.
Host Connection
Mode
Host Connection Mode 1 Set this parameter to Standard Mode.
Host Connection Mode 2
Do not specify any parameters.
Note: Do not specify HISUP OFF mode, either.
Note: You can either specify or omit any other parameters.
Relationship between Serial Number in Device List of Volume Operation
Window and TagmaStore AMS Storage System, TagmaStore WMS Storage
System Model
When the external storage system is TagmaStore AMS storage system or TagmaStore WMS storage
system, you can identify the storage system model from the serial number displayed in the Serial Number
column in the Volume Operation window.
The following table describes the relationship between serial number displayed in the Serial
Numbercolumn and the storage system model.
114 Connecting External Storage Systems