18 displayed, Information, Device – HP XP External Storage Software User Manual
Page 101: Column, Remote, Command
• HP StorageWorks XP24000 Disk Array
• HP StorageWorks XP12000 Disk Array
• HP StorageWorks XP10000 Disk Array
• HP StorageWorks XP1024/XP128 Disk Array
•
You do not need the license for External Storage to map a command device as a remote
command device.
•
The remote command devices are displayed in the Device column on the Volume Operation
window as follows:
Table 18 Displayed Information in Device Column for Remote Command Device
Storage System
Displayed Information in Device Column
Universal Storage Platform V
TagmaStore Universal Storage Platform
TagmaStore Network Storage Controller
Lightning 9900V series
SANRISE Universal Storage Platform
SANRISE Network Storage Controller
SANRISE9900V series
H24000
SANRISE H12000
SANRISE H10000
SANRISE H1024/H128
HP StorageWorks XP24000 Disk Array
HP StorageWorks XP12000 Disk Array
HP StorageWorks XP10000 Disk Array
HP StorageWorks XP1024/XP128 Disk Array
Format: Emulation Type + -CM
Example: OPEN-V-CM, OPEN-3-CM
TagmaStore Adaptable Modular Storage
TagmaStore Workgroup Modular Storage
Thunder 9500V series
SANRISE Adaptable Modular Storage
SANRISE Workgroup Modular Storage
SANRISE9500V series
DF600F-CM
•
If you access the remote command device from an OPEN host, the device information that is
reported by the remote command device is about the command device, which is mapped as a
remote command device, of the external storage system.
The device information about the command device that is reported to the host by the remote
command device includes the followings:
• Serial
number
• Vendor
• Device
name
Note:
The device name that is reported to the host is same as the one displayed in the Device
column of the Volume Operation window. For the device name that is reported to the host,
see
•
Even if the status of the remote command device is normal, an error may occur when the
operations or commands are performed on the remote command device.
If an error occurs even though the status of the remote command device is normal, check the status
of the command device of the external storage system, not the remote command device.
•
There are following restrictions for mapping a command device as a remote command device.
XP24000 External Storage Software User’s Guide
101