HP XP External Storage Software - Manual (Page 76)

When you select two or more external volumes in the LDKC:CU:LDEV, the other cells are
automatically added to match the number of external volumes that you previously selected in
the LDKC:CU:LDEV. When Interval is set, mapping is performed in intervals of that number.
• Pop-up menu
This dialog box does not have a pop-up menu that can be displayed.
Other items are same as the LDEV Mapping (Auto) dialog box. For details, see
“ LDEV Mapping (Auto) Dialog Box ” on page 74.
SSID Dialog Box
The SSID dialog box allows you to set the SSID to the LDEVs in the external volume. The storage system
assigns a SSID which identifies each group of LDEV number. If the LDEVs that you created do not have
SSID, you need to assign one using the SSID dialog box. The SSID dialog box is displayed during the
mapping operation when the SSID setting is required.
Figure 36 SSID Dialog Box
The SSID dialog box consists of:
• SLPR drop-down list
When the storage system is partitioned using Disk/Cache Partition, use the SLPR drop-down list.
If you select the SLPR Limited check box and select the SLPR number in the SLPR drop-down list,
only the SSIDs that can be used for the selected SLPR can be set in the Set SSID dialog box. If
you do not select the SLPR Limited check box, you can set the SSID from all the unused SSIDs
regardless of the selected SLPR number.
• List
• LDEV Boundary
The range of LDEVs in the selected external volume is displayed.
• SSID
The SSIDs allocated to each LDEV are displayed. If SSID is not set, a hyphen (-) is displayed.
• OK button
Saves the settings and closes the dialog box.
• Cancel button
Cancels the settings and closes the dialog box.
• Pop-up Menu
Right-click a row in the SSID column to execute the Set SSID command in the pop-up menu. The
Set SSID command allows you to set the SSID to the selected LDEV. When you click the Set
SSID, the following dialog box is displayed.
76 Performing External Storage Operations