HP XP External Storage Software - Manual (Page 60)

Table 10 The Items Clicked in the Path Operation Tree and the Contents Displayed
Items selected in
the drop-down list
Items displayed in
the tree
(Clicked items are
underlined)
Contents displayed in the list Reference
Fibre - Local
Subsystem
Subsystem
+ Port number
List of external ports of the local
storage system.
Section Path
Operation List
(When Subsystem
is Clicked) on page
61.
Subsystem
+ Port number
List of cross-subsystem paths
which are set to the selected
external ports of the local storage
system.
The same contents are displayed
when you click the WWN in the
tree.
Section Path
Operation List
(When Port or
WWN is Clicked)
on page63.
Fibre - External
Subsystem
Product name
+ WWN
List of WWNs of the external
storage system.
Section Path
Operation List
(When Product
Name is Clicked)
on page62.
Product name
+ WWN
List of cross-subsystem paths
which are set to the selected
WWN of the external storage
system.
The same contents are displayed
when you click the port number
in the tree.
Section Path
Operation List
(When Port or
WWN is Clicked)
on page 63.
• Operation (lower left of the window)
The name of the performed setting operation is displayed. You can check the details in the
Preview dialog box by clicking the Preview button.
• Preview button (lower right of the window)
When you click Preview, the Preview dialog box is displayed and you can confirm the contents
which was set in the list of the Path Operation window. The contents displayed in the Preview
dialog box have not been applied to the local storage system, yet. For details on the Preview
dialog box, see “ Preview Dialog Box ” on page 57
• Apply button
Applies the settings in the Preview dialog box to the local storage system.
When the settings are applied successfully, they are removed from the Preview dialog box and the
settings in blue and italics in the Path Operation window is displayed normally.
When the settings are not applied, the error messages are displayed and the settings in blue and
italics remain displayed in the Port Operation window. To see the error detail, click Preview to
open the Preview dialog box.
• Cancel button
Cancels all the settings in the Preview dialog box.
Path Operation Tree
The Path Operation tree is a tree on the left side of the Path Operation window consisting of a tree and a
drop-down list which is used to switch the display of the tree.
The Path Operation tree consists of:
• Drop-down list
A drop-down list to switch the items displayed in the Path Operation tree. You can select which
side to display the information on cross-subsystem paths from.
60 Using the External Storage GUI