HP XP External Storage Software - Manual (Page 63)

• Path Watch: The time from when the connection of all the cross-subsystem paths to the external
volume have been down to when the external volume is blocked.
• Status: Status of the cross-subsystem path. For the displayed statuses, see Table 11 on page 62
• Pop-up menu
Right-click a row in the Path Operation list to perform the following operations from the pop-up
menu.
Table 13 Pop-up Menu in the Path Operation List (when Product Name is clicked)
Pop-up menu Reference Description
Disconnect Paths
Section Stopping
the Use of Paths to
the External Volume
(Disconnect Paths) on
page 92.
Allows you to stop the use of the cross-subsystem
paths which are connected to the selected
external port of the local storage system.
Check Paths
Section Restoring the
Paths to the External
Volume (Check Paths)
on page 93.
Allows you to restart the use of the
cross-subsystem paths which are connected to
the selected external port of the local storage
system.
Change WWN Parameter
Section Changing
the Port Setting of
the External Storage
System on page 94.
Displays the Change WWN Parameter dialog
box. This dialog box allows you to change the
parameters on the port of the external storage
system.
Path Operation List (When Port or WWN is Clicked)
When you click a port or WWN in the Path Operation tree, a cross-subsystem path is displayed in the list.
Figure 29 Path Operation List when Port or WWN is Clicked
The Path Operation list consists of:
• Cross-subsystem Paths
The following items are displayed:
• Port: external port in the local storage system.
• WWN: WWN indicating the target port in the external storage system.
• Vendor: vendor name of the external storage system.
• Product Name: product name of the external storage system.
• Serial Number: serial number of the external storage system.
• Status: Status of the cross-subsystem path. For the displayed statuses, see
Table 11 on page 62
• Pop-up menu
When you click port or WWN in the Path Operation tree, the Path Operation list does not
have a pop-up menu that can be displayed.
Port Operation Window
The Port Operation window enables you to check the settings of ports and set the port attributes. To
display the Port Operation window, click Go, External Storage, and then Port Operation on the menu
bar of the Remote Web Console main window.
XP24000 External Storage Software User’s Guide 63