HP XP Data Shredder Software - Manual (Page 38)

Description Item
The icons indicate the SSID boundary area assignments:
An LDKC number or a CU number. SSIDs are assigned
to all the boundary areas.
An LDKC number or a CU number. SSIDs are assigned
to all the boundary areas.
An LDKC number or a CU number. SSIDs are not
assigned to all the boundary areas.
No SSID is assigned to this boundary area.
Use this table to set the SSID boundary area.
• LDKC: LDKC for the CU number that contains an LDEV
boundary with no SSID.
•
CU: CU number that contains an LDEV boundary with
no SSID.
• LDEV Boundary: Boundary area of the LDEV number
with no SSID.
•
SSID: Specified SSID. The default is blank.
SSID table
Select or enter the desired SSID. You can enter the SSID
only when you logged in as a storage administrator. Input SSID
Sets the SSID that you select or enter in the Input SSID list.
The SSID table shows the new SSID. Set
When this check box is selected, you can select the number
of an SSID that does not exist in the SLPR to which the parity
group does not belong. When the check box is cleared,
you can select only the number of an SSID in the SLPR to
which the parity group belongs.
This check box is available only when you logged in as a
storage administrator, and when there are two or more
SLPRs.
You cannot enter a number in this list when this check box
is cleared.
SSID number of another SLPR is used
Returns to the Install CV dialog box (2). Back
Opens the Install CV dialog box (4) (confirmation dialog
box). Next
Cancels the SSID setting, and returns to the Customized
Volume window. Cancel
Install CV Dialog Box (4)
Use the Install CV dialog box (4) to implement or release system disk settings. This dialog box does
not appear when you are not logged in as a storage administrator or when a V-VOL is being
manipulated.
38 Using the Virtual LVI/LUN and Volume Shredder GUI