HP StorageWorks XP Remote Web Console Software - Manual (Page 76)

• Gateway: Gateway address.
• Port Number: Port number.
• Keep Alive Timer: Keep-alive timer value. The unit is seconds.
• iSNS Server: Specifies whether to register information about the iSCSI port in the iSNS server.
• Enable: Registers the iSCSI port.
• Disable: Does not register the iSCSI port.
• IP Address of iSNS Server: iSNS server's IP address.
• Port Number of iSNS Server: iSNS server's TCP port number.
• Set: Applies settings in the Change Port Mode box to the Port table.
CHN list
This list appears if you select an icon under the NAS folder in the Package tree. CHN is the channel
adapter for NAS.
The CHN list displays all NAS channel adapters. When you select a channel adapter in the Package
tree, the CHN list displays information for the selected channel adapter. Information displayed in the
CHN list is shown in
Figure 29 .
Figure 29 CHN list (NAS channel adapters)
.
• CHN Name: NAS channel adapter's name.
• OS Status: Running status of the NAS channel adapter's OS. Statuses are:
• NEW: OS is not installed on the channel adapter or is being installed.
• UP: OS is started.
• DOWN: OS stopped normally.
• DOWN (Failure): OS stopped due to a failure.
• BUSY (Boot): OS is being started.
• BUSY (Shutdown): OS is being stopped.
• ERROR: OS is being stopped due to a failure.
• DUMP: Hibernation dump is being collected.
• DUMP SKIP: Hibernation dump collection is skipped.
• HUNG UP: OS is freezing.
• UNKNOWN: OS status collection failed.
If the status is UP, you can use XP LUN Configuration and Security Manager Software to stop the
OS. If the status is DOWN or DOWN (Failure), you can use XP LUN Configuration and Security
Manager Software to start the OS.
XP LUN Configuration and Security Manager Software panes 76