HP XP Data Shredder Software - Manual (Page 33)

Description Item
Select to specify the capacity and the number of CVs in
the VLL volume that you want to create.
Use the Capacity field to enter the capacity of the VLL
volume in the unit selected in the Capacity Unit list. The
available capacity range (minimum - maximum, for
example, 46 - 6720 MB, 50 - 7168 Cyl, or 315 - 8513
blocks) is shown on the right. The value can be incremented
by 1 MB, 1 cylinder, or 1 block.
Use the Number field to enter the number of volumes of
that size. The available range (for example, 1 - 489) is
shown on the right.
If Capacity Unit is MB or Cyl, there might be a difference
of up to several hundred kilobytes between the entered CV
capacity and the resulting CV capacity.
Specify capacity and number
Select to specify the number of VLL volumes to be created
out of the available free space in the VDEV. This option
can be selected only when the emulation type is OPEN-V.
Use the Number field to enter the number of volumes. If
this option is selected, the available range (for example,
1–47) is shown on the right.
When Capacity Unit is MB or Cyl, the capacity of each CV
will not be exactly the same as when Capacity Unit is Block,
and vice versa.
Divide free space by number
Select or specify the capacity of each VLL volume to be
created out of the available free space in the VDEV. This
option can be selected only when the emulation type is
OPEN-V.
Use the Capacity field to enter the capacity of the VLL
volumes to be created. The available capacity range
(minimum - maximum) is shown on the right (for example,
46 - 6720 MB, 50 - 7168 Cyl, or 315 - 8513 blocks).
When Capacity Unit is MB or Cyl, there might be a
difference of up to several hundred kilobytes between the
entered CV capacity and the resulting CV capacity.
Divide free space by capacity
Select to create a VLL volume out of the remaining free
space in the VDEV. This option can be selected only when
the emulation type is OPEN-V. Set remaining space as volume
Opens the selected settings in the table on the left. Set
Deletes the settings of particular VLL volumes selected in
the table on the left. Delete
Clears all the settings in the table on the left. Clear
Opens the Install CV dialog box (2). Next
Cancels the selected settings and returns to the Customized
Volume window. Cancel
Install CV Dialog Box (2)
The Install CV dialog box (2) shows a table of VLL volumes to be created. Use this dialog box to
specify the LDKC numbers, CU numbers, and LDEV numbers of the VLL volumes.
Install CV Dialog Box (2) 33