HP StorageWorks XP Remote Web Console Software - Manual (Page 69)

•
Pair Status box
The following check boxes are displayed.
◦ XP Business Copy: Displays or hides the XP Business Copy pairs.
◦ XP Snapshot: Displays or hides the XP Snapshot pairs.
If the check box is not selected, all the check boxes in each tab will be unavailable.
•
XP Business Copy tab
This tab is for XP Business Copy pairs. For details, see the HP StorageWorks
XP24000/XP20000 Business Copy Software User Guide.
•
XP Snapshot tab
The check boxes that indicate the status of XP Snapshot pairs are displayed. If you select or
deselect the check boxes, the XP Snapshot pairs in those statuses will be displayed or hidden
in the volume list. To use the check boxes in the XP Snapshot tab, you must select the XP
Snapshot check box in the Pair Status box.
•
OK button
Applies the settings, and closes the Display Filter dialog box.
•
Cancel button
Resets the settings, and closes the Display Filter dialog box.
Deleting the Settings in Preview List
The Preview list temporarily retains multiple operations of the same type. The settings in the Preview
list will be reflected in the storage system when you click Apply. If the specified operations complete
successfully, the Preview list will be cleared. If an error occurs during an operation, the failed
operation will remain in the Preview list with an error icon ( ) displayed on the left of the operation
name.
The XP Snapshot settings in the Preview list can be deleted only before clicking Apply. The
procedures for deleting the settings in the Preview list are as follows:
•
To delete all of the settings in the Preview list, click Cancel.
•
To delete only some of the settings in the Preview list:
1.
Select and right-click the setting which you want to delete. A menu will be displayed.
2. Select the Delete command from the menu.
Only the selected setting will be deleted from the Preview list.
Creating or Deleting Pools
This section describes how to create new pools. Additionally, the procedures for changing the
setting of pools or deleting pools are also described in this section.
Creating New Pools
The required time for creating pools depends on the number and the capacity of the pools and
pool-VOLs which you add to the pool. If you create many pools, or if you add a pool-VOL of large
capacity, it may take about 20 minutes until the processing ends.
To create a new pool:
Deleting the Settings in Preview List 69