HP XP Business Copy Software - Manual (Page 52)

Copying access attributes
If you create a BC pair using volumes that LUN Security XP Extension has set to VMA (Volume
Management Area), you can copy information about the access attribute in the P-VOL's VMA to the
S-VOL.
Table 16 VMA setting and availability of Paircreate operation
S-VOL P-VOL
Volume with VMA Volume without VMA
NO OK Volume without VMA
OK NO Volume with VMA
NOTE:
You can specify a volume with VMA as a reserve volume.
Figure 25 shows the process of copying of access attribute when you create a pair using volumes
with VMA.
NOTE:
When you use volumes with VMA to create a BC pair, both the P-VOL and S-VOL must have VMA.
Figure 25 Copying access attribute
.
In Figure 25 , if both the P-VOL and S-VOL have VMA, the P-VOL's VMA is copied to the S-VOL. In
Figure 25 , the S-VOL's access attribute is Read/Write when the pair status is SMPL. After the P-VOL's
VMA is copied to the S-VOL, the S-VOL's access attribute is Read Only, which is same as the P-VOL's
Business Copy XP (BC) for the Array 52