HP StorageWorks XP Remote Web Console Software - Manual (Page 56)

• MU: The MU number of the Business Copy pair created with the P-VOL. For details about what
will be displayed in this item if you select XP Snapshot pairs, see the HP StorageWorks XP24000
Snapshot User’s Guide.
• S-VOL: Information about S-VOL is displayed in AAA-BB-CCC(XX:YY:ZZ) format.
• AAA: The port ID (cluster and channel number)
• BB: The group number of host group
• CCC:
LU number
• XX:YY:ZZ: LDKC number:CU number:LDEV number
Note: An LDEV number that ends with a # mark indicates that the LDEV is an external volume
(for example, 00:00:01#). An LDEV number that ends with a letter X indicates that the LDEV is
a virtual volume used by XP Thin Provisioning (for example, 00:00:01X). For details regarding
the external volumes, see the HP StorageWorks XP24000 External Storage Software User’s
Guide. For information about XP Thin Provisioning, see the HP StorageWorks XP24000 Thin
Provisioning Software User's Guide.
• Copy Pace: The copying pace for all pairs being created. For details about what will be
displayed in this item if you select XP Snapshot pairs, see the HP StorageWorks XP24000
Snapshot User’s Guide.
• CLPR (P): The cache logical partition of the P-VOL is displayed.
• CLPR (S): The cache logical partition of the S-VOL is displayed.
• Error Code: If the specified operation in the Preview List is performed by clicking the Apply button
in the Pair Operation window, and the operation fails, the reason code is displayed.
The information displayed in the information field below the Preview List is as follows:
• Preview: X(Y)/Z, where
X = the number of settings remaining in the Preview List that are still not applied to the storage
system
Y = the type of pair operation
Z = command option
You can change the Preview List by right-click the setting in the Preview List and display the pop-up
menus. Table 15 on page 56 shows the available pop-up menu commands in the Preview List.
Table 15 Business Copy Pop-up Menu Commands of the Preview List
Command Feature
Delete
Cancels the selected settings. If you perform this command, the selected settings will be
cleared.
Modify
Allows you to change the setting of the selected operation. This command becomes
accessible only when the item you select from the Preview List is set to Paircreate,
Pairsplit or Pairresync operation.
Error Detail
Displays the error message dialog box, which displays the error code and message.
For the Business Copy error codes, see the HP StorageWorks XP Remote Web Console
Error Codes.
History Window
The History window (see Figure 26 on page 57) displays the past record of pair operations performed
on the Pair Operation window. For information about how to look up the operation history, see
“ Viewing Pair Operation History ” on page 88.
56 Using the Business Copy GUI