Viewing s-vol path information – HP StorageWorks XP Remote Web Console Software User Manual
Page 86
Note:
An LDEV number that ends with a # mark indicates that the LDEV is an external volume
(for example, 00:00:01#). An LDEV number that ends with a letter X indicates that the LDEV is
a virtual volume used by XP Thin Provisioning (for example, 00:00:01X). For details regarding
the external volumes, see the HP StorageWorks XP24000 External Storage Software User’s
Guide. For information about XP Thin Provisioning, see the HP StorageWorks XP24000 Thin
Provisioning Software User's Guide.
The L2 Pair Information box in the Detail dialog box has the following features:
•
P-VOL: The LUN information for the P-VOL is displayed in XX:YY:ZZ (LDKC number:CU
number:LDEV number) format.
Note:
An LDEV number that ends with a # mark indicates that the LDEV is an external volume
(for example, 00:00:01#). An LDEV number that ends with a letter X indicates that the LDEV is
a virtual volume used by XP Thin Provisioning (for example, 00:00:01X). For details regarding
the external volumes, see the HP StorageWorks XP24000 External Storage Software User’s
Guide. For information about XP Thin Provisioning, see the HP StorageWorks XP24000 Thin
Provisioning Software User's Guide.
•
S-VOL: The LUN information for the S-VOL is displayed in XX:YY:ZZ (LDKC number:CU
number:LDEV number) format.
•
MU: MU number.
•
Status: The status of the L1 pair is displayed. For detailed information about pair statuses,
see
•
Sync.: The rate of synchronization of the P-VOL and the S-VOL.
•
CTG: The consistency group number will be displayed if the L1 pair is registered to the group. If
the pair is not registered to the consistency group, '---' will be displayed.
•
CLPR(P): Information about the cache logical partition (CLPR) of the P-VOL is displayed in AA:BB
(CLPR number:CLPR name) format.
•
CLPR(S): Information about the cache logical partition (CLPR) of the S-VOL is displayed in AA:BB
(CLPR number:CLPR name) format.
•
Refresh the window after this dialog box is closed. check box: If you select the check box, the
information displayed in the Pair Operation window will be updated after the Detail dialog box
closes. If you do not select the check box, the information in the Pair Operation window will be
the same before and after you close the Detail dialog box.
•
The Refresh button updates the information on the Detail dialog box.
•
The Close button closes the Detail dialog box.
Viewing S-VOL Path Information
The S-VOL Path dialog box displays information on the selected pair (all paths defined for the S-VOL).
To open the S-VOL Path dialog box:
1.
Select one or more pair in the Volume List on the Pair Operation window.
2.
Right-click the selected volumes or pairs to display the pop-up menu commands.
3.
Select the S-VOL Path command from the pop-up menu.
The S-VOL Path dialog box is displayed.
Note:
You cannot select the S-VOL Path command when you have selected SMPL volumes.
86
Performing Business Copy Operations