HP StorageWorks XP Remote Web Console Software - Manual (Page 67)

• Total number of External LUs: Number of external LUs that are connected.
• Found WWNs: WWNs found when you clicked Discovery in the Device tree.
• Remain LUs: Number of external LU numbers available (out of 15,360), other than those that
have already been used.
• WWN Entry: Number of LUs that are currently used in the external array out of the maximum
theoretically possible (15,360).
Displayed in the format The number of connected ports/16,384 (the number of ports which
can be connected).
• Total number of WWNs: Number of external array ports that are connected.
• Total number of Paths: Number of paths set between the local array and external array.
• Preset list
Displays the contents of settings that were set by operations started on the LU Operation pane.
Contents displayed in the Preset list have not yet been applied to the local array. They are applied
when you click Apply. For more information, see
Preset list (LU Operation pane) .
• Operation information area
Displays operation information about settings in the Preset list, including:
• Operation: Setting operation name.
• Number of Objects in Preset: Number of rows displayed in the Preset list.
• Apply button
Applies pending operations in the Preset list to the local array. When operations are applied
successfully, they are removed from the Preset list. Otherwise, error messages appear and error
settings remain in the Preset list.
• Cancel button
Cancels all settings in the Preset list.
Device tree
To display the Device tree, select the Device tab. The Device tree displays information on the external
array that is connected to the external port. The contents displayed in the Device list (upper right of
the panel) change depending on the items selected in the Device tree.
Figure 29 Device tree
.
The Device list (right pane) changes according to the item selected in the Device tree.
• Subsystem
XP External Storage Software User Guide 67