HP StorageWorks XP Remote Web Console Software - Manual (Page 196)

NOTE:
If a parity group number starts with V (for example, V1-1), the parity group consists of one or more
virtual volumes (V-VOLs).
NOTE:
If an LDEV number ends with # (for example, 00:01#), the LDEV is an external LU. For more information
about external LUs, see the
HP StorageWorks External Storage XP user guide.
NOTE:
The RAID level is left unspecified with a hyphen (-) when the LDEV is an external LU.
The following icons indicate parity group status.
Table 32 Parity group status icons
Status Icon
Parity group.
Set of parity groups that are concatenated into one.
Each LDEV in this set of parity groups usually extends
over more than one parity group.
The following icons indicate VDEV status.
Table 33 VDEV status icons
Status Icon
No pending CVS actions.
NOTE:
This icon appears immediately after you click Apply.
CVS actions have been stored, but not yet implemented on the array.
NOTE:
This icon appears before you click Apply.
Capacity Unit list
Used to select the unit for displaying the volume capacity: MB, Cyl, or block.
When you manipulate mainframe volumes, you can only select Cyl.
Parity Group - LDEV table
Displays information about logical volumes in the selected VDEV.
Custom Volume Size operations 196