HP NonStop G-Series - Manual (Page 265)

Error Messages
HP AutoSYNC User’s Guide—522580-019
D-9
Critical event messages
413
Cause. An attempt to allocate memory in the extended segment failed.
Effect. The process abends.
Recovery. Since the product usually resizes the segment to satisfy memory requests,
this error should not occur. Report this error to product support.
414
Cause. Allocation of the extended segment failed.
Effect. The process abends.
Recovery. The error number is provided in the message. Determine the reason for the
failure and correct it.
419
Cause. A product component encountered a process trap.
Effect. The process abends.
Recovery. Report the error information to product support.
423
Cause. When an ASYSYNC process starts, it must obtain information from the
AutoSYNC monitor process on the destination system. This error is generated if it was
not possible to contact the monitor.
Effect. The synchronization process terminates. No files are synchronized.
Recovery. Start the AutoSYNC monitor on the destination system.
Memory pool allocation error
Allocate segment error
Utility program process trap
Remote monitor down