HP Photosmart p1000 1000 Printer - Manual (Page 53)

Two-sided printing
www.hp.com/photosmart 47
Two-sided printing from your Windows PC
Setting up the HP PhotoSmart printer software for two-sided printing
Before you use the Two-Sided Printing Module for the first time, you need to set up the
printer software for automatic two-sided printing.
Note: You only need to set up the printer software once.
To set up the HP PhotoSmart printer software:
1. Open the HP PhotoSmart printer Toolbox: from the Windows
Start menu, choose
Programs , HP PhotoSmart , 1000 , then HP PhotoSmart 1000 Series Toolbox .
2. Select the Configuration tab.
3. Make sure Automatic Two-Sided Printing Module is selected, then click Apply .
4. Close the Toolbox window: click the X in the upper right corner of the window.
Automatic two-sided printing
1. Load paper in the paper tray. See “Loading paper” on page 11 for details.
2. From your software application’s
File menu, choose Print .
Your software application’s Print dialog box displays.
Note: The Print dialog box is different for each software application.
3. Select the print settings:
• Make sure the HP PhotoSmart 1000 Series is the selected printer.
• Select the pages you want to print.
• Select the number of copies you want to print.
Where you find these settings depends on the software application you are using.
You may need to click a Setup button.