HP 250 G2 Notebook PC - Manual (Page 39)

Connecting a VGA monitor or projector
To see the computer screen image on an external VGA monitor or projected for a presentation,
connect a monitor or projector to the computer's VGA port.
To connect a monitor or projector:
1. Connect the VGA cable from the monitor or projector to the VGA port on the computer as
shown.
2. Press f4 to alternate the screen image between 4 display states:
● PC Screen only: View the screen image on the computer only.
● Duplicate: View the screen image simultaneously on both the computer and the external
device.
● Extend: View the screen image extended across both the computer and the external
device.
● Second screen only: View the screen image on the external device only.
Each time you press f4 , the display state changes.
Connecting an HDMI device
To see the computer screen image on a high-definition TV or monitor, connect the high-definition
device according to the following instructions.
To connect an HDMI device to your computer, you need an HDMI cable, sold separately.
Using video 29