HP Virtual Connect FlexFabric 10Gb24-port Module for c-Class BladeSystem - Manual (Page 8)

Introduction 8
Interactive mode question/request Description Reference
Please enter action ("help\"
for list):
(required) Enter a command, or enter
help for a list of available
commands.
-a <command>
Commands (on page 10 )
Please enter action: (required) Asked if help was entered
for previous question. Enter a
command.
-a <command>
Commands (on page 10 )
Please enter Onboard
Administrator IP Address:
(required for all commands except
discover and packageinfo) IP
address of the active OA in the
primary enclosure
Commands (on page 10 )
-i <IP>
Please enter Onboard
Administrator Username:
(required for all commands except
discover and packageinfo) User
name of the active OA in the primary
enclosure
Commands (on page 10 )
-u <USER>
Please enter Onboard
Administrator Password:
(required for all commands except
discover and packageinfo)
Password of the active OA in the
primary enclosure
Commands (on page 10 )
-p <PWD>
Please enter starting IP
address:
(required) First IP address in the range
to search discover
-s <START IP>
Please enter ending address: (required) Ending IP address in the
range to search
discover
-s <END IP>
Please enter firmware package
location:
(required) Full path to the Virtual
Connect package on the local
computer
packageinfo (on page 13 )
report (on page 13 )
update (on page 15 )
-l <FILE>
Please enter the file location: (optional) Full path to the
configuration backup or support dump
file
configbackup
supportdump
-l <FILE>
Please enter the Configuration
backup password:
(optional) Password for the
configuration backup file
configbackup
update (on page 15 )
-cp <CONFIG PASS>
Please enter Force Update
options if any (eg:
version,health):
Enter options separated by a comma. update (on page 15 )
-f <FORCE>
Please enter VC-Enet module
activation order if any (eg:
parallel or odd-even or serial
or manual. Default: odd-even):
Enter one of the following: parallel,
odd-even, serial, or manual
update (on page 15 )
-oe <ORDER>
Please enter VC-FC module
activation order if any (eg:
parallel or odd-even or serial
or manual. Default: serial):
Enter one of the following: parallel,
odd-even, serial, or manual update (on page 15 )
-of <ORDER>
Please enter the time (in
minutes) to wait between
activating or rebooting VC-Enet
modules [max 60 mins. Default:
0 mins]:
Enter the time in minutes (maximum of
60 minutes).
update (on page 15 )
-we <MINUTES>
Please enter the time (in
minutes)to wait between
Enter the time in minutes (maximum of
60 minutes). update (on page 15 )
-wf <MINUTES>