Installing hyper-v (for windows 2008 r2 standard) – HP ProLiant ML310 G3 Server User Manual
Page 19
9.
Collapse all the path.
10. Click File >Exit (save the MMC console if required).
5.
Repeat the step 2.
6.
On the BitLocker Drive Encryption page, select one of the following method to unlock your
drive at startup:
•
Insert a USB flash drive.
•
Enter a Password.
7.
On How do you want to back up your recovery key page, the following options appear:
•
Save to a USB flash drive – Saves the password in the USB flash drive.
•
Save to a file – saves the password in the file on a network drive or other location.
•
Print the recovery key – Prints the password.
Use one or more of these options to preserve the recovery password. For each option,
select the option and follow the wizard steps to set the location for saving or printing the
recovery password.
8.
After saving the recovery password, click Next. The Encrypt the selected disk volume page
appears.
IMPORTANT:
The recovery password is required in the event the encrypted disk is moved
to another computer, or changes are made to the system startup information. HP recommends
to create additional copies of the password and store it in a secure place apart from the
computer to assure access to your data. Your recovery password is required to unlock the
encrypted data on the volume if the BitLocker enters into a locked state. This recovery password
is unique to this particular BitLocker encryption. You cannot use it to recover encrypted data
from any other BitLocker encryption session.
9.
On Choose how much of your drive to encrypt page, select the disk encryption option and
click Next.
10. Confirm that the Run BitLocker System check box is selected, and then click Continue.
11. Click Restart Now. The computer restarts and BitLocker verifies if the computer is
BitLocker-compatible and ready for encryption. If it is not, an error message alerting you to
the problem appears.
12. If it is ready for encryption, the Encryption in Progress status bar appears. You can monitor
the ongoing completion status of the disk volume encryption by dragging your mouse cursor
over the BitLocker Drive Encryption icon in the notification area at the bottom of your screen.
By completing this procedure, it is ensured that you have encrypted the operating system
volume and have created a recovery password unique to this volume. The next time you log
in, you will see no change. If the TPM changes or cannot be accessed, and if there are changes
to key system files, or if someone tries to start the computer from a product CD or DVD to
circumvent the operating system then, the computer switches to recovery mode until the recovery
password is supplied.
For more information regarding BitLocker, see the Microsoft® website
.
Installing Hyper-V (For Windows 2008 R2 Standard)
To install Hyper-V for Windows 2008 R2 Standard:
1.
Click Start, and select Administrative Tools>Server Manager.
2.
In the left column, click Roles.
3.
Select Add Roles and click Next to proceed.
4.
Select the check box for Hyper-V component and click Next to continue.
Installing Hyper-V (For Windows 2008 R2 Standard)
19