HP Integrity NonStop J-Series - Manual (Page 13)

5344-2SE Tape Drive Installation and User’s Guide — 546010-001
2 -1
2
Installing and Configuring the Tape
Drive for the NonStop NS-Series
Integrity Server
This section includes:
Installation
1. Unpack and check the shipment.
2. Install the rail mounting kit.
The rack rails supplied with the 1U rackmount tape enclosure can be used to install
the unit in racks that have round, square, or threaded holes in the vertical mounting
bars. The rails will fit racks with 23 - 34 inches (58 - 86 cm) separation between the
front and rear vertical mounting bars. The rails are identical and may be mounted
on either the left or the right side.
Installation 2-1
Configuration 2-6