HP Deskjet D2345 Printer - Manual (Page 56)

To calibrate color
1.
Load Letter or A4 unused plain white paper in the paper tray.
2. Verify that both a tri-color print cartridge and a photo print cartridge are installed in
the printer.
3. Open the printer Toolbox .
4. Click Calibrate Color.
5. Click Start, and then follow the onscreen instructions.
Print a test page
You can print a test page to view the effects of any changes you have made to the print
settings.
To print a test page
1.
Open the printer Toolbox .
2. Click the Print a Test Page button, and then follow the onscreen instructions.
View estimated ink levels
Follow these instructions to view the estimated ink levels of the print cartridges that are
installed in the printer:
1.
Open the printer Toolbox .
2. Click the Estimated Ink Level tab.
Note If the print cartridges were used before being installed in the printer, the
estimated ink levels will not appear on the Estimated Ink Level tab.
The Estimated Ink Level tab also contains print cartridge ordering information. To view
this information, click the Print Cartridge Information button.
Maintain the printer body
Because the HP Deskjet ejects ink onto the paper in a fine mist, ink smudges will
eventually appear.
To remove smudges, stains, or dried ink from the exterior
1.
Turn off the HP Deskjet, and then disconnect the power cord.
2. Wipe the outside of the HP Deskjet with a soft cloth that has been lightly moistened
with water.
Caution Do not use any type of cleaning solution. Household cleaners and
detergents might damage the printer finish. Keep all fluids away from the interior.
Do not lubricate the metal rod on which the print cartridge cradle slides. Noise is
normal when the cradle moves back and forth.
Remove ink from your skin and clothing
Follow these instructions to remove ink from your skin and clothing:
Chapter 10
54 HP Deskjet D2300 series