HP XP Array Manager Software - Manual (Page 85)

Figure 40 In XP Continuous Access Asynchronous/Continuous Access Journal configuration: restoring
UserDB1 and UserDB2 together or separately
Figure 41 In XP Continuous Access Asynchronous/Continuous Access Journal configuration: restoring
UserDB1 and UserDB2 together
• For information about precautions to take when changing a volume configuration, see “ Precautions
when changing a volume configuration ” on page 91.
• Even if there are pair volumes created in the storage system, you cannot use them unless they have
RAID Manager configurations defined on the host.
• For an environment that uses virtual command device as a command device, start the RAID Manager
instances on the virtual command device server before executing Application Agent CLI so that
the virtual command device is in a state that can be used. Since Application Agent CLI itself does
not activate nor stop the RAID Manager instances on the virtual command device server, when
Application Agent CLI is executed but the virtual command device is in a state that cannot be used,
an error will occur.
If an error occurs, check the log file for RAID Manager on the server where Application Agent CLI
was executed and confirm that the cause of the error is the virtual command device (
\\.\IP-
Application Agent CLI User Guide 85