Parameters, To display the format of the online operation -11, Parameters -11 – HP Hitachi Dynamic Link Manager Software User Manual

Page 199: To place paths online -11

Advertising
background image

|-hbaportwwn HBA-port-WWN [-tid target-ID -hlun host-LU-
number
]]
[-s]

To Display the Format of the Online Operation

dlnkmgr online -help

Parameters

To Place Paths Online

-path

Indicates that the target of the operation is a path managed by HDLM.
This parameter is optional because the online is always used for paths,

so it is assumed.
Specify the paths to be taken online by using the -hba, -cha, -pathid, or
-hbaportwwn parameter. If you do not specify any of these parameters,

the command will place all the offline paths online. If there is a path that

cannot be placed online, a message asks whether you would like to

continue processing. To ignore the offline path that cannot be placed

online and to continue processing, enter y. To stop the processing, enter
n.

-hba host-port-number.bus-number

Use this parameter to place online, at one time, all the paths that pass

through a specific HBA port. The command will place online all the paths

connected to the HBA port that has the specified host port number and

bus number.
Specify the host port number and bus number of the target HBA port: the

numbers are found in the PathName field displayed using the view

operation. Enter a period between these two parameter values. For

details about the view operation, see

view (Displays Information) on page

6-29

. Leading zeros of each parameter value can be omitted; however,

when the host port number or bus number of the target HBA port is 0000,

enter 0000 or 0 for the corresponding parameter value.

Example

The following example shows how to place online all paths connected

to an HBA port whose host port number is 0001 and bus number is
0001:

>dlnkmgr online -hba 1.1

KAPL01057-I All the paths which pass the specified HBA will

be changed to the Online status. Is this OK? [y/n]:y

KAPL01061-I 3 path(s) were successfully placed Online; 0

path(s) were not. Operation name = online

>

-cha -pathid AutoPATH_ID

Command Reference

6-11

Hitachi Dynamic Link Manager User Guide (for Windows(R))

Advertising
This manual is related to the following products: