HP Hitachi Dynamic Link Manager Software - Manual (Page 271)

For details about the procedure for performing an unattended installation, see
Performing a New Installation of HDLM on Windows Server 2003 on page
3-28 or Performing a New Installation of HDLM on Windows Server 2008 on
page 3-51 .
Format
installhdlm {-f installation-information-settings-file-name [-
c ]| -v| -h}
Parameters
-f installation-information-settings-file-name
Sets the information required to perform an installation.
For details about the installation-information settings file, see
Contents of
an Installation-Information Settings File on page 7-17 .
-c
Checks the contents of the installation-information settings file, the
license, and other necessary information, but does not perform an
installation.
-v
Displays the information that was set during installation.
If the installation was performed without using the unattended installation
functionality, the information specified in a dialog box is displayed.
Example:
>installhdlm -v
installdir=C:\Program Files\HITACHI\DynamicLinkManager
storage_emc=n
storage_eva=n
HDLM_core=n
For an explanation of each display item, see Table 7-3 Keys That Can Be
Defined in the [INSTALLATION_SETTINGS] Section on page 7-18 .
-h
Displays the format of the installhdlm utility.
Contents of an Installation-Information Settings File
For information about setting the installation-information settings file, see
Preparations for Installing HDLM by Performing an Unattended Installation on
page 3-26 .
[INSTALLATION_SETTINGS] section
This section defines operation information for the installhdlm utility. Do not
modify any definitions of items that are not listed in Table 7-3 Keys That Can
Be Defined in the [INSTALLATION_SETTINGS] Section on page 7-18 .
Utility Reference
7-17
Hitachi Dynamic Link Manager User Guide (for Windows(R))