HP SmartStart-Software - Manual (Page 7)

Introduction 7
New features
The Firmware DVD 9.0 has the following new features:
• Ships on a DVD
• Contains Firmware Deployment Tool and Blade Bundle functionality, which is integrated into the
Firmware DVD
• Contains the BladeSystem 2010.03 Release Set
• Contains HP Smart Update Manager 4.0.0
Supported firmware
Firmware type Supported by HP Smart Update Firmware DVD
System ROM Yes
iLO 2 firmware Yes, local and remote
Broadcom NIC firmware Yes
Intel NIC firmware No
NetXen NIC firmware Yes
Power PIC firmware Yes
Smart Array controller firmware Yes
SAS and SATA hard drive firmware behind Smart
Array controllers Yes
SAS and SATA hard drive firmware behind non-
Smart Array controllers No
Emulex, QLogic, and Brocade Fibre Channel Host
Bus Adapter firmware Yes, offline only
Tape blade firmware Yes
Onboard Administrator firmware Yes, online only
Virtual Connect firmware Yes, online only
HP 3Gb SAS BL Switch firmware*** No
***The HP 3Gb SAS BL Switch firmware can only be updated by uploading a bin file through the Virtual
VSM product. This firmware is currently delivered as a binary image file on the HP website and must be
downloaded and manually upgraded.
Because firmware might be able to update only in online or offline mode for some components, you might
need to execute the Smart Update Firmware DVD both online and offline to update all the firmware in an
enclosure.