HP Virtual Connect 8Gb 20-port Fibre Channel Module for c-Class BladeSystem - Manual (Page 13)

Commands 13
Example
List the state of modules in an enclosure:
vcsu -a healthcheck -i 192.168.0.100 -u Administrator -p password -vcu
Administrator -vcp password
packageinfo
Extract the package information from the supplied package path and display the following information:
• Digital Signature Validation (for Virtual Connect firmware version 2.30 and higher)
• Package Version
• Ethernet Firmware Version Timestamp
• Ethernet Firmware Supported Hardware
• FC Firmware Version
• FC Firmware Supported Hardware
• Release Notes (extract, not display)
Item Description
Syntax
vcsu -a packageinfo -l <FILE>
Parameter:
FILE Full path to the Virtual Connect package on the local computer or supported remote server
Example
Display package information from a file named VCpackage:
vcsu -a packageinfo -l VCpackage
report
Display the current running firmware version on all modules in a specific target enclosure. Also display the
VC-Enet and VC-FC firmware versions provided in the specified VC package file, and whether or not the
module can be updated. In addition to displaying the module firmware version and status, the report
command also displays details about the VC package contents.
Because the package version details appear, you must provide a VC package file as part of the input at the
command line.
Item Description
Syntax
vcsu -a report -i <IP> -u <USER> -p <PWD> -vcu <VCM USER> -vcp <VCM PASS>
-l <FILE>
Parameters:
IP IPv4 or IPv6 address of the active OA in the enclosure*
USER Name of the OA user with privileges to access all enclosure interconnect bays. Minimum length
is 1 character. Maximum length is 40 characters.**
PWD Password of the OA user. Minimum length is 3 characters. Maximum length is 40
characters.**
VCM USER Name of Virtual Connect user with Domain privileges. Required if an enclosure is in a Virtual
Connect domain. Minimum length is 1 character. Maximum length is 31 characters.