Alter syncfileset, Alter, Syncfileset – HP Integrity NonStop J-Series User Manual
Page 129: Command option, Commands, For a description of
Command Interpreter
HP AutoSYNC User’s Guide—522580-018
8-35
ALTER SYNCFILESET
PRIMARY cpu-number
the CPU number (in the range of 0 to 15) of the primary monitor process.
PRIORITY process-priority
a process priority (in the range of 1 to 199) for the monitor process.
ALTER SYNCFILESET
Modifies the options of the syncfilesets in the specified fset-id range.
ALTER SYNCF[ILESET] fset-range [, fset-range ], ...
{, options... };
fset-range is { * | fset-id | fset-id - fset-id }
common-options:
{ AUTOSUSPEND | NO AUTOSUSPEND
}
{ BATCHID batchid | NO BATCHID
}
{ EXCLUDE exclude-file
}
{ EXCLUDEP[URGE] excludep-file | NO EXCLUDEP[URGE]
}
{ FROM file-set
}
{ FROMO[NER] user-id | NO FROMO[NER]
}
{ [IP]HOST[NAME] { tcpip-address | host-name }
| NO [IP]HOST[NAME]
}
{ INTERVAL interval [ MINUTES | HOURS | DAYS ] | NO INTERVAL}
{ KEEPS[ECURITY] | NO KEEPS[ECURITY]
}
{ KEEPB[ACKUPINFILE] | NO KEEPB[ACKUPINFILE]
}
{ LISTA[LL] | NO LISTA[LL]
}
{ OPENU[PDATE] [ n [ SECONDS | MINUTES | HOURS ] ]
| NO OPENU[PDATE]
}
{ OWNER { user-id | user-name } | NO OWNER
}
{ PRI[ORITY] priority | NO PRI[ORITY]
}
{ PURGE | NO PURGE
}
Continued