HP Integrity NonStop J-Series - Manual (Page 166)

Command Interpreter
HP AutoSYNC User’s Guide—522580-018
8-72
HISTORY
is the name of the DEFINE. HELP displays the syntax and a description of the
DEFINEs.
USAGE displays information about the usage of the DEFINE, otherwise it displays
it as a list of possible subtopics.
MONITOR [ monitor-command ]
displays the syntax and description of commands that can be sent to the monitor
process via AUTOSYNC. If no monitor command is specified, HELP displays a list
of the commands as subtopics.
monitor-commands is one of: BACKUPCPU, LOG, SECURITY, STATUS or
SWITCH.
HISTORY
Displays the saved commands in the history buffer. These commands can be executed
using the FC or ! commands.
count
the number of commands to display. The default is 10. If fewer commands are in
the history buffer, all commands are displayed.
INFO AUTOSYNC
Displays the remote access control information for one system or for all systems that
have this system as a destination.
\system-name
an Expand system name.
*
designates all systems that have this system as a destination.
If FROM is omitted, AUTOSYNC displays the remote access control for all systems.
HISTORY count
INFO AUTOS[YNC] [ FROM [ \system-name | * ] ];