HP Integrity NonStop J-Series - Manual (Page 188)

Command Interpreter
HP AutoSYNC User’s Guide—522580-018
8-94
STOP MONITOR
If fset-range is omitted, all syncfilesets for the current user are displayed.
status-option:
ACTIVE
displays status information for ASYSYNC processes that are currently in the
process of synchronizing file sets.
BRIEF
displays the synchronization process name, the destination system, the
number of active file sets in the batchid and status of the synchronization
process.
DETAIL
displays detailed status information.
SYSTEM system-name
specifies the Expand node name of a system for which the information is
displayed. This option is useful for file sets that have the destination system
specified as a wildcard "*".
If omitted, the status for all systems in the file set that meet the criteria is
displayed.
USER { user-id | user-name } | ALLUSERS
displays status information for ASYSYNC processes that run under the
specified Guardian user ID or user name.
ALLUSERS displays status information for ASYSYNC processes for all
syncusers.
If omitted, the current user ID is assumed.
STOP MONITOR
Performs an orderly shutdown of a monitor process. All scheduled synchronizations
are stopped.
process-name
the process name of the monitor process to be stopped. The default is the current
monitor process for the session.
mapdb
a MapDB subvolume. Since each MapDB has an associated monitor process, this
is simply an alternative method to specify the process to be stopped.
STOP MONITOR [ process-name | mapdb ];