HP Integrity NonStop J-Series - Manual (Page 260)

Error Messages
HP AutoSYNC User’s Guide—522580-018
D-8
Critical event messages
Effect. The ASYSYNC process performs an updated set of synchronizations.
Recovery. Informational message only; no corrective action is needed.
Critical event messages
402
Cause. The monitor process has been intentionally abended to produce a saveabend
file for problem diagnosis.
Effect. The primary monitor process abends. The backup process takes over and
continues processing.
Recovery. Send the saveabend file to product support.
403
Cause. An operation was attempted, but no license for that service has been installed.
Effect. The operation is rejected.
Recovery. Obtain and install the necessary license.
411
Cause. A logic error has been detected by the product.
Effect. The process abends.
Recovery. Report the error information to product support.
412
Cause. An attempt to resize the extended segment failed.
Effect. The process abends.
Recovery. The error number is provided in the message. Determine the reason for the
failure and correct it.
Monitor intentionally abended
Invalid license
Assertion failure
Resize segment error