HP Virtual Connect 8Gb 24-port Fibre Channel Module for c-Class BladeSystem - Manual (Page 10)

Commands 10
Commands
collect
Contact the OA using the supplied credentials and execute a SHOW ALL from the OA CLI, saving the
output to an "oaShowAll.txt" file in the current directory.
This support action also contacts the primary VC Manager using the supplied credentials and executes the
following commands, saving the output to a "vcmShowAll.txt" file:
• show enclosure *
• show domain
• show network *
• show fabric *
• show profile *
• show stackinglink
• show interconnect *
• show firmware
Item Description
Syntax vcsu -a collect -i <IP> -u <USER> -p <PWD> -vcu <VCM USER> -vcp
<VCM PASS>
Parameters:
IP IP address of the active OA in the enclosure*
USER Name of the OA user with privileges to access all enclosure interconnect bays. Minimum
length is 3 characters.
PWD Password of the OA user. Minimum length is 3 characters.
VCM USER Name of Virtual Connect user with Domain privileges. Required if an enclosure is in a
Virtual Connect domain. Minimum length is 3 characters.
VCM PASS Password for the Virtual Connect user. Minimum length is 3 characters.
*In a multi-enclosure environment, this must be the IP address of the active OA in the primary enclosure.
Example
Collect configuration information from the OA and VC Manager:
vcsu -a collect -i 192.168.0.100 -u Administrator -p password -vcu
Administrator -vcp password
discover
Locate remote OA enclosures that exist on the network within a specified address range.