HP w19e 19 inch LCD Monitor - Manual (Page 12)

Back to Contents Page
Using the Monitor
Operating Instructions • External Controls • LED Indicators •
Settings • Setting the Optimal Resolution • Adjusting the Volume • Using Headphones •
Locking the OSD • Adjusting OSD Settings • OSD Menu
Operating Instructions
Control buttons are located on the front of the panel, as shown below. Use the MENU button to adjust the display
settings to your personal preferences:
•
Set up the monitor, attach the cables, and adjust the tilt as described in the Setup section above.
•
Press the power button (C) to turn the monitor on and off. The power indicator lights up when the monitor is
on.
•
The monitor must be turned on for the other control buttons to work.
•
Set the resolution ( Setting the Optimal Resolution ), adjust the volume ( Adjusting the Volume ), and connect
headphones if desired ( Using Headphones ).
•
Adjust the onscreen display (OSD) settings ( Adjusting OSD Settings ).